LIU Deng-feng,GE Ling-mei,WANG Guang-heng,et al.Influences of Glycidyl Methacrylate (GMA) on Properties of Soybean Protein Plastics[J].Soybean Science,2010,29(02):302-305.[doi:10.11861/j.issn.1000-9841.2010.02.0302]
甲基丙烯酸缩水甘油酯对大豆分离蛋白塑料性能的影响
- Title:
- Influences of Glycidyl Methacrylate (GMA) on Properties of Soybean Protein Plastics
- 文章编号:
- 1000-9841（2010）02-0302-04
- Keywords:
- SPI; GMA; Modification; Tensile properties; Water Resistance
- 分类号:
- TQ321.4
- 文献标志码:
- A
- 摘要:
- 用模压的方法制备了甲基丙烯酸缩水甘油酯（GMA）改性大豆分离蛋白质（SPI）塑料，探讨了GMA含量对SPI塑料的力学性能和耐水性的影响，并采用TG、SEM对SPI塑料和GMA改性SPI塑料进行了表征。结果表明：少量GMA可以对SPI塑料起到增强、增韧作用，并可提高其耐水性；加入少量的GMA可以提高SPI塑料的热稳定性；少量GMA改性SPI塑料能形成性能良好的柔性链结构，这种结构能明显提高SPI塑料的断裂伸长率。
- Abstract:
- Glycidyl Methacrylate (GMA) modified Soy Protein Isolate (SPI) plastics were prepared via molding method. The effect of GMA content on the tensile properties and water resistance were discussed. The thermal properties, structure, and morphology of the molded SPI plastics, GMA modified SPI plastics were analyzed by Thermogravimetry and Scanning electron microscope. TG analysis indicate that addition of a small amount of GMA can improve the thermal stability of SPI plastics. SEM analysis shows that flexible chain formed among the SPI matrix, plasticizer and a small dose of GMA, hence a super elongation at break were obtained.
参考文献/References:
[1]汪浩，黄华，张隐西. 大豆蛋白质塑料特性的研究[J].中国塑料, 2002，16(8)：57-60. ( Wang H, Huang H, Zhang Y X. Study on the special property of soy protein plastics[J]. China Plastics, 2002，16(8)：57-60.) [2]汪浩，黄华，张隐西. 大豆蛋白质塑料研究进展[J].西部粮油科技,2001,26(5):26-30. (Wang H, Huang H, Zhang Y X. Progress in the study of soy protein plastics[J]. China Western Cereals & Oils Technology, 2001,26(5):26-30.) [3]Kumar R, Choudhary V, Mishra S, et al. Adhesives and plastics based on soy protein products[J]. Industrial Crops and Products,2002,16:155-172. [4]熊正俊，赵国华.酰化对大豆蛋白结构和功能性质影响[J].粮食与油脂,2001（9）:5-7. (Xiong Z J, Zhao G H. Effects of acylation on functionalities and structure of soy protein[J]. Cereals & Oils,2001（9）:5-7.) [5]黄曼,卞科.交联剂对大豆分离蛋白疏水性的影响[J],郑州工程学院学报,2002,23(2):5-9.(Huang M, Bian K. Effects of crosslinking agent on the hydrophobicity of soybean protein isolate[J]. Journal of Zhengzhou Institute of Technology, 2002,23(2):5-9.) [6]黄曼,卞科.大豆蛋白在工业上的开发利用及理化改性研究进展[J],郑州工程学院学报,2002,23(1):61-65.(Huang M, Bian K. Development and application of soybean protein in industrial products and studies on physical-chemical modification[J]. Journal of Zhengzhou Institute of Technology, 2002,23(1):61-65.) [7]姚玉静，杨晓泉.乙酰化大豆分离蛋白的功能特性研究[J],中国调味品,2001（9）:16-19.(Yao Y J, Yang X Q. The functional properties of isolate soybean protein using acetic anhydride[J]. Chinese Condiment, 2001（9）:16-19.) [8]Zhang J, Mungara P, Jane J. Mechanical and thermal properties of extruded soy protein sheets[J]. Polymer,2001,42:2569-2578. [9]Sue H J, Wang S, Jane J L. Morphology and mechanical behaviour of engineering soy plastics[J]. Polymer, 1997, 38(20):5035-5040. [10]Schiling C H, Babcock T, Wang S, et al. Mechanical properties of biodegradable soy-protein plastics[J]. Journal of Materials Research,1995,9:2197-2202. [11]Salmoral E M, Gonzalez M P, Mariscal M P, et al. Comparison of chickpea and soy protein isolate and whole flour as biodegradable plastics[J]. Industrial Crops and Products, 2000,11:227-236. [12]汪浩，黄华，张隐西.大豆蛋白质塑料加工和力学性能的研究[J].中国塑料,2001,15(7):47-50.(Wang H, Huang H,ZhangY X. Processing and mechanical properties of soy protein plastics[J]. China Plastics,2001,15(7):47-50.) [13]李红良，陈复生，李里特,等. 加工条件对大豆分离蛋白塑料特性的影响[J].食品科技,2002(11): 25-29.(Li H L, Chen F S, Li L T, et al. The effect of processing conditions on soy protein plastic characteristic[J]. Food Science And Technology, 2002(11): 25-29.)
备注/Memo
基金项目：国家自然科学基金资助项目（20676110）